HOBBY Biotherm eco, for aquariums

HOBBY Biotherm Eco has the advantage of being very easy to use while having many functions. For example, in one click you can switch from heating mode to cooling mode using a fan. It is also possible to program a second temperature in order to simulate a reduction in the nighttime temperature.

When entering programming mode, the socket for connecting external devices is deactivated for safety reasons. To protect the electronic components, a delay of 60 seconds is configured between two switching states before the respective switching location is reactivated.

HOBBY Biotherm Eco incorporates an optical alarm which is emitted if the programmed set point for the temperature is exceeded or not reached. The alarm range can be configured between +/- 1°C and 10°C.

The temperature probe has a USB connector for easy replacement in the event of a fault.


Features:

    Operating voltage: 230 V, 50 Hz
    Connected power: 2000 W maximum (ohmic load)
    Temperature display range: -9.9 - 99.9°C
    Temperature setting range: 10.0 - 60.0°C
    Temperature alarm range: +/- 0.1 - 10°C (00 = no alarm)
    Temperature display accuracy on screen: 0.1°C
    Temperature setting accuracy (value from which external devices are switched): +/- 0.1 °C
    Tolerance of the temperature probe: +/- 0.5 °C
    Probe cable length: 3 m