External velvet surface 77x59xmm...
All products Tunze - Reef Store Bulk - Importer and Wholesaler.
12V Solenoid Valve Tunze Reference 7074.400 12 V solenoid valve for tap water or CO2, 0 to 10 bar (0 to 145 psi) with connector for 6 mm (.23") hose for CO2 or reverse osmosis units, including power supply. For continuous operation.
CO2 valve set including non-return valve 7070.010 and a 5 m (196.8 in.) hose 7072.300.
Blades set 86 mm (3.39") Tunze 0220.154
Care Magnet strong Tunze 0222.020 For a glass thickness of 15 to max. 20 mm (2/3" - ¾"). Width: 86 mm (3.4") Length: 140 mm (5.5") Including: 1 stainless steel blade, 2 spare plastic blades, 2 Care Booster, 4 clips, 8 colored end caps (blue, green, white, black).
Care Magnet long Tunze 0222.015 For a glass thickness of 10 to max. 15 mm (3/8" - 2/3"). Width: 86 mm (3.4") Length: 140 mm (5.5") Including: 1 stainless steel blade, 2 spare plastic blades, 2 Care Booster, 4 clips, 8 colored end caps (blue, green, white, black).
Care Magnet nano Tunze 0222.010 For 6 up to a glass thickness of max. 10 mm (1/4" - 3/8"). Width: 45 mm (1.77") Length: 78 mm (3.07") Including: 1 replacement plastic blade 45 mm (1.77"), 8 colored end caps (blue, green, white, black).
Care Magnet pico Tunze 0220.006 Care Magnet pico — significantly more compact than conventional small algae magnets. For 3 up to a glass thickness of 6 mm (.12" - .24"). Width: 40 mm (1.57") Length: 81 mm (3.19"). Inside part: 20 mm (.79") Outer part: 17 mm (.67") Plastic blades are firmly installed and not interchangeable.
Care Magnet strong + Tunze 0222.025 For a glass thickness of 20 to max. 25 mm (¾" - 1"). Width: 86 mm (3.4") Length: 140 mm (5.5") Including: 1 stainless steel blade, 2 spare plastic blades, 2 Care Booster, 4 clips, 8 colored end caps (blue, green, white, black).
Recommended from 20 to 140 liters (5.3 to 37 USgal.) of sea water. Immersion depth: approx. 135 - 155 mm (5.3 ” - 6.1”) Skimmer cup volume: 0.2 liters (.05 USgal.) Air capacity: approx. 100 l/h (26 USgal./h) Energy consumption: 2.5 W, 230V/50Hz (115V/60Hz) Dimensions (L x W x H): 110 x 63 x 215 mm (4.3” x 2.5” x 8.5”) Magnet Holder for glass...
Recommended, depending on tank load, from 60 to 250 liters (15 to 65 USgal.) of sea water. Immersion depth: approx. 225 to 245 mm (8.9" to 9.7") Skimmer cup volume: 0.2 liters (.05 Usgal.) Air capacity: approx. 150 l/h (40 USgal./h) Energy consumption: 4 W, 230V/50Hz (115V/60Hz) Dimensions (L x W x H): 110 x 90 x 305 mm (4.3" x 3.5" x 12") Magnet Holder...
Recommended, depending on tank load, from 200 to 1,200 liters (53 to 317 USgal.) of sea water. Immersion depth: approx. 255 to 285 mm (10 to 11") Skimmer cup volume: 0.7 liters (0.18 USgal.) Air capacity: approx. 400 l/h (105 USgal./h) Energy consumption: 13 W, 230V/50Hz (115V/60Hz) Dimensions (L x W x H): 140 x 110 x 415 mm Silence Magnet Holder up to...
For fresh and saltwater from 60 to 400 liters (15 to 105 USgal.), depending on tank load. Variable pump output from 250 to 850 l/h (70 to 225 US gal./h) Energy consumption: 2.5 - 4.5 W, 230V/50Hz (115V/ 60Hz) Dimensions (L x W x H): 110 x 90 x 255 mm (4.3" x 3.5" x 10") Max. immersion depth: approx. 230 mm (9.1") Fixed by means of Magnet Holder up to a...
For seawater biotopes from 60 to 250 liters (15 to 65 USgal.). Power consumption only 8.5 W for all components, 230V/50Hz (115V/60Hz).
Gel-like, thixotropic superglue. Does not run, can also be applied on vertical surfaces. Particularly suitable for bonding when fragmenting soft corals. Also suitable for slightly porous substrates. Contents: 20 g (0.7 oz.)
Epoxy resin based adhesive for safe attachment of coral offshoots on stone substrates. Dyed red, similar to calcareous algae, suitable especially for coral reef aquariums. It is also suitable for attaching glass, ceramic, wood and many plastics. Contents: 112 g (4 oz.)
Coral Gum instant 120 g Tunze 0104.750 Coral Gum instant is a two-component coral adhesive for safe cementing of coral fragments to stone substrates.
Coral Gum instant 400 g Tunze 0104.760 Coral Gum instant is a two-component coral adhesive for safe cementing of coral fragments to stone substrates.
Recommended for salt water aquariums up to 1,500 liters (400 USgal.) Immersion depth from 100 to 200 mm (4" - 8") without setting. Water flow rate: 900 l/h Air capacity: 1,000 l/h Energy consumption: 15 W, 230V/50Hz Skimmer cup volume: 2 l Dimensions of the skimmer cup including lid: ø215 x H.218 mm Dimensions (L x W x H): 350 x 300 x 440 mm Headroom...
Recommended for salt water aquariums up to 3,000l (800 USgal.) Immersion depth from 100 to 200mm (3.9" - 7.8") without setting. Water flow rate: 1,500l/h Air capacity: 1,400l/h Energy consumption: 24 W, 230V/50Hz (32 W, 115V/60Hz) Skimmer cup volume: 2l Dimensions of the skimmer cup including lid: ø215xH.218mm Dimensions (LxWxH): 350x300x490mm Headroom...
External velvet surface 77x59xmm Tunze 0220.526
Spectrum especially suitable for refuge and basin for algae growth in seawater and plant growth in freshwater. Can be used in the air and under water.
Suitable for stony coral aquariums up to approx. 40 liters (11 USgal.), soft coral aquariums up to approx. 60 liters (16 USgal.), and freshwater aquariums up to approx. 80 liters (21 USgal.). Equipped with 76 1-watt LEDs with Ultra Low Current Technology.
Suitable for stony coral aquariums up to approx. 20 liters (5.5 USgal.), soft coral aquariums to approx. 40 liters (11 USgal.). Equipped with 15 white LEDs (6.500 K) and 15 blue LEDs (455 nm). Can be used in the air and under water. Color temperature: approx. 25,000 K
Water level controller with only one sensor for nano aquariums or small aquariums with up to 200 liters (55 USgal.). Can be installed in a cabinet filter or directly on the aquarium edge. Scope of delivery: ready for installation with 12 V power supply, low-voltage metering pump, 3 m (118") hose, magnet holder for up to 10 mm (3/8") glass thickness and a...
Water level regulator with two sensors suitable for use in cabinet filters, in Comline® filters or directly on the edge of the aquarium. Scope of delivery: ready for mounting with power supply unit 12 V, metering pump, hose, magnet holder for sensors.
Plastic blades 45 mm (1.77"), 2 pcs. Tunze
Plastic blades 86 mm (3.39"), 2 pcs. ,Tunze 0220.153
Protective grating Tunze 6025.200
For TUNZE® DOC Skimmer 9410. Cable: 2 m (78.7") Maximum air capacity: 600 l/h (160 USgal./h) Water flow rate: 900 l/h (235 USgal./h) Energy consumption: 11 W (15 W) at an air capacity of 600 l/h (160 USgal./h) Pump outlet with ¾" BSP thread (NPT). Pump housing with strainer and silencer. Equipped with air regulation, coupling and silencer.
For TUNZE® DOC Skimmer 9415. Cable: 2 m (78.7") Maximum air capacity: 1,200 l/h (317 USgal./h) Water flow rate: 1,000 l/h (264 USgal./h) Energy consumption: 15 W at an air capacity of 1,200 l/h (317 USgal./h). Pump outlet with ¾" BSP thread (NPT). Pump housing with strainer and silencer. Equipped with coupling and silencer.
For TUNZE® DOC Skimmer 9430. Cable: 2 m (78.7") Maximum air capacity: 1,600 l/h (423 USgal./h) Water flow rate: 2,000 l/h (528 USgal./h). Energy consumption: 24 W (32 W) at an air capacity of 1,600 l/h (423 USgal./h). Pump outlet with ¾" BSP thread (NPT). Pump housing with strainer and silencer. Equipped with coupling and silencer.
Pressure reducer Tunze 7077/3
For seawater biotopes from 200 to 500 liters (53 to 132 USgal.). Power consumption only 31 W for all components, 230V/50Hz (115V/60Hz).
Plug calibrate the redox of profilux
Ro water controller Tunze 8555
Rotor 9410.047 Tunze For skimmer Tunze 9410 For pump hydrofoamer 9410.040
Rotor 9420.047 Tunze For tunze skimmer 9420 For pump hydrofoamer 9420.040
Rotor 9430.047 Tunze For skimmer 9430 For hydrofoamer 9430.040
Rough surface, 77 x 59 mm (3.0 x 2.3 in.) Tunze 0220.521
Silphos 400 g Tunze 0920.000
For fresh and sea water, depending on the tank load from 200 to 500 liters (53 - 132 USgal.). Variable pump capacity from 500 to 2.100 l/h (132 to 555 USgal./h).
Tunze Hydro propeller Reference: 6080.120
Tunze 1073.050 Recirculation pump Silence electronic Flow rate: 1,100 to 3,000 l/h (290 to 790 US gal./h) with Turbelle® Controller Hmax: 3.9 m (153.5 in.) ¾" NPT hose connection Energy consumption: 10 - 43 W Voltage / frequency: 100 - 240 V / 50 - 60 Hz Cable length: 3 m (118.1 in.) Dimensions without outlet and suction cups: 118 x 94 x 75 mm (4.6 x 3.7...
Tunze 6105.240 power supply unit 12-24V DC
Calibration solution 600 µS/cm Tunze Reference 7005.140 For fresh water.
Tunze Buffer solution for pH 7 and 9 Reference 7040.120 For all pH measuring instruments.
Tunze buffer solution for pH 5 and 7 Reference 7040.130 For all pH measuring instruments.
Tunze cleaning solution reference 7040.200 For pH, mV and conductivity electrodes.
Tunze 8 elastic pads for Magnet Holder
Tunze bushing and attenuation disk Reference 6055.740
Cable 1.2 m Turbelle® Controller Tunze Order No.: 7092.300 Connects two Turbelle® controllers for a simultaneous controlling or connects one Turbelle® controller with a Multicontroller.
For marine aquariums up to 1,200 liters (317 USgal.) depending on the coral population. Energy consumption: 17 W (25 W) Voltage / frequency: 230V/50Hz (115V/60Hz) Cable length: 2.2 m (86.6") External operation or in a cabinet (recommended), self-priming. Filling quantity: 1,850 ml (488.7 USgal.), without filling Dimensions (L x W x H): 230 x 150 x 350 mm...
This product is no longer manufactured Tunze calcium Dispenser 5074.000
Tunze carbon foam insert reference 3162.300 For comline filter 3162 & 3163
Tunze care Bacter, 40ml Care Bacter contains bacteria on a substrate of powdered Maerl gravel, which keep fresh or seawater aquaria clean.
Tunze Comline® DOC Skimmer 9001 DC Recommended from 20 to 160 liters (5.3 to 42.3 USgal.) of sea water.
Tunze Comline® DOC Skimmer 9004 DC Recommended, depending on tank load,from 60 to 300 liters (15 to 79 USgal.) of sea water.
Tunze Comline® DOC Skimmer 9012 DC Recommended, depending on tank load, from 200 to 1,400 liters (53 to 370 USgal.) of sea water.