This extension will extend the size of your reverse osmosis hose simply and quickly. Quick and easy installationWaterproof for reverse osmosis hose 1/4
This product is specially designed for the reverse osmosis water circuits.
Support Bubble Magus for 4 dosing pump hoses. Simple attachment to decanter or aquarium up to 15 mm thick
RO TDS 2 Monitor is used for the precise determination of the water quality of reverse osmosis units.
The osmosis upgrade will turn it on and off when the osmosis water supply is full.
Sediment prefilter should be used with the Carbon Cartridge to ensure best results from your RO unit.
Inline granular activated carbon cartridge 10 '' X2 '' standard for osmosis unit 1/4 '' thread
This product is specially designed for osmosis water circuits. With its auto-clip system, you can quickly and simply modify your water circuit.
RO Tee Push Fit is an 1/4-1/4 equal Tee fitting with push fit connections for RO tube.
Non-return valve for osmosis pipe 1/4. Block the flow of reverse osmosis in one direction
12 V solenoid valve for tap water or CO2, with connector for 1/4 hose for CO2 or reverse osmosis units
90 ° elbow self-clip for reverse osmosis circuit allowing a simple and rapid modification of the reverse osmosis water circuit.
Replacement RO 50 Membrane = 197 liters/24H
Booster Pump works perfectly with any RO unit to give a serious boost to it's performance, allowing you to get more out of your system.
Fitting for gooseneck tap with 1/4 osmosis hose
Teflon tape to be wrapped around the threaded connections before assembly. Teflon seals the installation of fittings
10" Sediment Cartridge is 5 microns and is designed to remove solids and particles from above 5 microns from tap water. It works as part of the Reverse Osmosis unit to cleanse the mains water of all types of contaminant and pollutants for a perfectly pure aquarium.
20" Sediment Cartridge is 5 microns and is designed to remove solids and particles from above 5 microns from tap water. It works as part of the Reverse Osmosis unit to cleanse the mains water of all types of contaminant and pollutants for a perfectly pure aquarium.
Reduces or eliminates odors, taste and chlorine in drinking water. It also retains insecticides, pesticides and benzene present in the water.
Reduces or eliminates odors, taste and chlorine in drinking water. It also retains insecticides, pesticides and benzene present in the water.
The ultra filter cartridge is made up of the fabric, and the water filtration precision is less than 0.01 micron.
10" Sediment Cartridge is 5 microns and is designed to remove solids and particles from above 5 microns from tap water. It works as part of the Reverse Osmosis unit to cleanse the mains water of all types of contaminant and pollutants for a perfectly pure aquarium.
10" Sediment Cartridge is 1 microns and is designed to remove solids and particles from above 1 microns from tap water. It works as part of the Reverse Osmosis unit to cleanse the mains water of all types of contaminant and pollutants for a perfectly pure aquarium.
1/4 inch quick connector to connect to an inline water purifier or reverse osmosis filter cartridge.Connection model is to be screwed on "cartridges without connection"The hose quickly attaches to the "In Push" fitting with one push
Screw connection for fixing a reverse osmosis pipe on a booster pump
Rail with 25 cm screw for water level regulator with 1 or 2 sensors
Empty cartridge for ion exchanger resin. Take the connecting fittings.
10 inch osmosis filter holder For reverse osmosis and ultrafiltration. Sold without cartridge and resin. Sold without fittings. Sold without key.
10-inch empty osmosis cartridge for 10-inch filter holders. Empty container 10 inches for all materials (ion exchange resin, ...)
+ or - 1000ml ion exchange resin For better conservation, it is sold in a resealable plastic jar. Can be put in an empty cartridge and/or in a 10 inch filter holder.
DiST 3, economical EC tester, 2000 µS Supplied in a box, with protective cap, 4 x 20 mL sachets of 1413 µS/cm calibration solution and battery.
pH/EC/TDS/°C tester, 3999 µS; 2000mg/L An ideal solution for those who regularly measure pH and conductivity. For each parameter, the temperature is permanently indicated. waterproof, rugged and reliable, HI98129 is perfect for field measurements. HI98129 comes with a tool for probe replacement and batteries.
Tunze Water valve Reference: 8555.200Operating on low voltage 9 to 12 V DC, replaces the enclosed meter pump in the Osmolator® for several aquariums with gravity line, for example.
12V Solenoid Valve Tunze Reference 7074.400 12 V solenoid valve for tap water or CO2, 0 to 10 bar (0 to 145 psi) with connector for 6 mm (.23") hose for CO2 or reverse osmosis units, including power supply. For continuous operation.
Support Bubble Magus for 4 dosing pump hoses. Simple attachment to decanter or aquarium up to 15 mm thick